HP Raid管理工具hpacucli

HP为linux系统提供了两个硬件管理工具：hpacucli 和 hpasmcli 。hpacucli 工具可以查看HP服务器的Raid状态是否正常，服务器硬盘是否正常，服务器电源是否有故障等信息。hpasmcli 工具可以很详细查看服务器CPU，内存，处理器，电源等的温度信息。

一、hpacucli 的安装使用

1、安装

[root@localhost ~]# rpm -ivh hpacucli-9.40-12.0.x86_64.rpm

2、查看raid和硬盘状态

普通查看

[root@localhost ~]# hpacucli ctrl all show config
Smart Array E200i in Slot 0 (Embedded)    (sn: PR97MP2834    )
  array A (SAS, Unused Space: 0  MB)
      logicaldrive 1 (558.7 GB, RAID 5, OK)
      physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 300 GB, OK)
      physicaldrive 1I:1:3 (port 1I:box 1:bay 3, SAS, 300 GB, OK)
      physicaldrive 1I:1:4 (port 1I:box 1:bay 4, SAS, 300 GB, OK) 

详细查看

由于输出过多，这里只列出部分关键内容：

[root@localhost ~]# hpacucli ctrl all show config detail
……
Array: A
      Interface Type: SAS
      Unused Space: 0  MB
      Status: OK
      Array Type: Data
      Logical Drive: 1
        Size: 558.7 GB
        Fault Tolerance: 5
        Heads: 255
        Sectors Per Track: 32
        Cylinders: 65535
        Strip Size: 64 KB
        Full Stripe Size: 128 KB
        Status: OK
        Caching:  Enabled
        Parity Initialization Status: Initialization Completed
        Unique Identifier: 600508B1001038333420202020200004
        Disk Name: /dev/cciss/c0d0
        Mount Points: /boot 200 MB, / 542.5 GB
        OS Status: LOCKED
        Logical Drive Label: A0100C5FPR97MP2834    2E7A
        Drive Type: Data
      physicaldrive 1I:1:2
        Port: 1I
        Box: 1
        Bay: 2
        Status: OK
        Drive Type: Data Drive
        Interface Type: SAS
        Size: 300 GB
        Rotational Speed: 10000
        Firmware Revision: HPDE
        Serial Number: 6SE24FXD0000B124L36W
        Model: HP      EG0300FAWHV
        PHY Count: 2
        PHY Transfer Rate: 3.0Gbps, Unknown
……

二、hpasmcli 工具的使用

1、安装

[root@localhost ~]# rpm -ivh hp-health-9.40-1602.44.rhel6.x86_64.rpm

2、常用功能

[root@localhost ~]# hpasmcli -s 'show dimm'    查看内存信息
[root@localhost ~]# hpasmcli -s 'show TEMP'    查看硬件温度
[root@localhost ~]# hpasmcli -s 'show fans'    查看风扇信息
[root@localhost ~]# hpasmcli -s 'show powersupply'    查看电源模块
[root@localhost ~]# hpasmcli -s 'show server'    查看机器型号,序列号,CPU,内存大小

3、帮助

可以 show的类型比较多，可以通过hpasmcli -s ‘show’ 获取可用的参数，具体如下：

[root@localhost ~]# hpasmcli -s 'show'
Invalid Arguments
    SHOW ASR
    SHOW BOOT
    SHOW DIMM [ SPD ]
    SHOW F1
    SHOW FANS
    SHOW HT
    SHOW IML
    SHOW IPL
    SHOW NAME
    SHOW PORTMAP
    SHOW POWERMETER
    SHOW POWERSUPPLY
    SHOW PXE
    SHOW SERIAL [ BIOS | EMBEDDED | VIRTUAL ]
    SHOW SERVER
    SHOW TEMP
    SHOW TPM
    SHOW UID
    SHOW WOL 

上面这些输出实际上和直接ssh登陆ilo口里提供的show命令类似。